WATER FLOW SWITCH MODEL – FEU 63
STANDARD FLOW RATE-S.P.D.T.
FEU CONTROLS make Flow Switch is designed for use on Non-Viscous liquid, Water, Methyl Glycol Solutions or any other liquid not injurious to Brass & Non-Ferrous Metal parts that come in the contact with the liquid. The SPDT contacts make or break and electrical circuit when flow starts or stops.
HOPSIG
ELEC ALTING SPOT VA
Can be used in
- Water purification and treatment systems
- Booster pumps
- Fast Shut down on high input boilers to guard against circulation failure
- Cooling systems for electronic tube, bearing & compressor
- Can be used any where, who wants to take Flow, No-Flow signal.
| ELECTRICAL RATING | |||
| MOTOR RATING | 120 V | 208 V | 240 V |
| HORSEPOWER | 1 | 1 | 1 |
| A.C. FULL LOAD Amps. | 16 | 8.8 | 8 |
| A.C. LOCKED ROTOR Amps | 96 | 52.8 | 48 |
| NON-CONDUCTIVE LOAD Amps | 16 | 16 | 16 |
| PILOT DUTY-125VA 24/240V A.C. | |||
They can be wired to close circuit and open a second Circuit. When liquid flow either exceeds or drops below the Adjusting flow rate.
- Pipe Connection : 25 mm BSMPT
- Type : On-Line type.
- Max. Liquid Pressure : 150 PSIG.
- Max. Liquid Temperature : 70′ C
- Min. Liquid Temperature : 1’C